Shower Installation in Oregon City | New Shower Plumbed Right From the Start
We provide Shower Installation throughout Oregon's Clackamas, Multnomah, Washington, Marion, and Yamhill Counties.
A new shower needs more than a showerhead and some tile. The valve body, supply lines, drain, and waterproofing all have to be installed correctly or you end up with leaks behind the wall, poor water pressure, or temperature swings. Our plumbers handle the full plumbing scope of a shower installation: setting the valve, running supply and drain connections, and testing everything before the tile goes up. We are a family-owned shop in Oregon City with 5.0-star Google reviews. Call (503) 919-7243 or request an estimate online.
Shower Installation for Oregon City Homes
Shower installation in Oregon City covers the plumbing work required to install a new shower or replace an existing one: setting the mixing valve in the wall, connecting hot and cold supply lines, installing the drain assembly and P-trap, and mounting the showerhead and trim. We install showers in new construction, remodels, and straight replacements across Clackamas, Multnomah, and Washington counties as part of our bathroom remodeling services from our Oregon City plumbing team.
When it is time for shower installation
If your shower valve leaks behind the wall, drips from the handle, or cannot hold a consistent temperature, replacing the entire shower assembly makes more sense than patching the old valve. If you are converting a tub/shower combo into a standalone shower, the drain position, valve height, and supply routing all change. If your shower pan is cracked or the drain leaks into the subfloor, the whole assembly needs to come out. If you are adding a shower where one did not exist, supply and drain lines have to be run from scratch.
Homes in Barclay Hills and Canemah with original shower valves from the 1960s and 1970s often have two-handle valves that lack anti-scald protection. Replacing them with a modern pressure-balancing or thermostatic valve is a safety upgrade.
Our shower installation process
We start by positioning the valve body in the wall at the correct height and depth for the trim kit and tile thickness. We connect hot and cold supply lines to the valve and run them back to the branch lines. We install the shower drain in the pan, connect the P-trap to the waste line, and make sure the drain falls at the right slope.
Before the wall closes, we pressure test the supply connections and flow-test the drain to confirm there are no leaks. After tile or wall finish is complete, we return to install the trim plate, handle, showerhead, and any accessories. We run the shower, check temperature mixing, and verify the drain keeps up with full flow.
Shower installation cost in Oregon City
A valve and trim replacement on an existing shower where the rough-in stays in the same position is the most straightforward version. Adding a shower to a space that did not have one, or converting a tub/shower combo to a standalone shower with a new drain position, costs more because of the additional rough-in work. We assess the scope, explain the plumbing involved, and give you a price before any work starts. Call (503) 919-7243 to schedule.
Common Questions About Shower Installation
How long does a shower installation take?
A valve and trim replacement on existing rough-in takes a few hours. A full new shower installation with rough-in, drain, and supply work typically takes one to two days for the plumbing portion. Tile and finish work by other trades adds to the overall project timeline.
Can you install a rain showerhead or multi-head system?
Yes. Rain heads, handheld combos, and multi-head body spray systems all require proper valve sizing and water pressure to function well. We install thermostatic valves that support multiple outlets and test flow at each head to make sure pressure is consistent.
What kind of shower valve do you install?
We install pressure-balancing and thermostatic mixing valves. Pressure-balancing valves prevent temperature spikes when someone flushes a toilet or runs water elsewhere. Thermostatic valves hold an exact temperature regardless of pressure changes. Both meet Oregon plumbing code for anti-scald protection.
Do I need to replace my shower valve if I am just retiling?
If the valve is working properly and does not leak, you can keep it. But if the wall is already open for tile work, it is a good time to upgrade an older two-handle valve to a modern single-handle with anti-scald protection. The labor to access the valve is already done.
Can you add a shower to a bathroom that only has a tub?
Yes. We run supply lines to a new valve position, install the valve and showerhead, and connect a drain. If the tub is staying and you are adding a shower above it, we install a tub/shower valve. If you are removing the tub entirely, that becomes a tub-to-shower conversion with a new shower pan and drain.
What causes low water pressure in a shower?
A partially closed shutoff valve, a clogged showerhead, mineral buildup in the supply lines, or an undersized valve can all reduce shower pressure. In older Oregon City homes with galvanized supply lines, internal corrosion restricts flow. We diagnose the cause and fix the specific issue.
Do you handle the shower pan and drain, or just the plumbing above the wall?
We handle the drain assembly, P-trap, and drain connection. We also set and connect pre-formed shower pans. Custom tile shower pans are typically built by the tile installer, but we install the drain body and connect it to the waste line before the pan is set.
Will the shower work if someone runs water elsewhere in the house?
With a modern pressure-balancing or thermostatic valve, yes. These valves compensate for pressure changes in the system so the shower temperature stays consistent even when a toilet flushes or a faucet opens somewhere else in the house.
Local plumbers offering dependable Bathroom Remodeler systems you can count on in Oregon City and Beyond
Bathroom Plumbing Installation
Bathroom Remodeling
For a bathroom refresh in your area, our plumbers deliver top-quality remodeling done right—honest pricing, careful workmanship, and reliable timelines—so your home gains comfort, value, and a beautiful, leak-free space.
Bathroom Renovation
Bathtub Replacement
Master Bathroom Remodel
Plumbing for Bathroom Renovations
Tub to Shower Conversion
Walk-In Shower Conversion
Schedule Your Service
With a Local Expert
Need a plumber? We’ll show up fast, fix it right, and leave your space clean. Book your service today.
Customers in Oregon City
and surroundiung areas love our service
Here’s our neighbors’ take—real feedback from actual plumbing jobs, including Shower Installation and the dynamic city placeholder Oregon City, shared as positive Google Review posts from customers we’ve served nearby.
View All Reviews
GASP! I turned the gas, water, and electricity off, and called my contractor for help. Little did I know I would be referred to plumbing specialists extraordinaire, Principled Plumbing.
When Nate (the owner) arrived, he explained the issues, gave me options, and then his crew arrived early the next day to install a tankless heater. They were professional, very personable, and cleaned up spic and span. Nate and his crew stayed late until the job was finished, even though they had to route a new gas line. I 100% recommend them for any of your plumbing needs!
Do not hesitate to support this business!
I will definitely use them again and recommend them to anyone with plumbing issues.
Tips & Insights from an Experienced Plumber
Read all the latest news and tips from the Principled Plumbing.
How Much Does a Bathroom Remodel Cost in the Portland Metro? 2026 Real Numbers from a Local Plumber
Key Highlights: A bathroom remodel in the Portland metro area can cost from $7,500 if you just want a simple…
Does Converting Your Tub to a Shower Hurt Home Value in the Portland Metro?
Key Highlights: A tub-to-shower conversion can make the resale value of your home go up or down. It depends on…
Does Tub To Shower Conversion Increase home Value?
Key Highlights: A tub-to-shower conversion can boost your home’s resale value, especially if you already have another bathtub in the…